troubleshooting tips for automatic cnc pipe end forming mach The principle of troubleshooting tips for automatic CNC pipe end forming Mach is to cooperate with the air-push oil type, control the movement direction of the air pressure system by the electrical system, and promote the oil circuit to make a straight round trip movement. In the round trip movement, According to the signal detected from the limit of the drag plate, the movement of the gas and oil circuit is controlled and changed, so as to achieve the expected cutting route. troubleshooting tips for automatic cnc pipe end forming mach What are the main points to pay attention to in the process of use? Stations and experts tell you:

1. Spindle speed change must be carried out after stopping. Gear should be fully engaged when changing gears. When the machine is found to be abnormal, stop and check immediately.

2, before cutting to adjust the tool, clamp the work. The length of the clamping part shall not be less than 50 mm. The parking apron should be fixed, and it can work only after clamping, loosening, forward, backward and other sequence test.

3, when the machine tool is rotating, any part of the human body shall not contact the transmission parts. When operating, tie the cuffs and do not wear gloves. The human head should deviate from the cutting direction.

4. When changing the tool, measuring the workpiece, lubricating and cleaning the pipe head, it must be stopped.

5. When cutting the tube head, it is necessary to prevent the tube head from flying out and wounding people.

6. When the long material pipe is put into the material rack and the lead wire is loosened, measures should be taken to prevent the pipe from rolling, impact and pressure injury.

7, the use of grinding wheel troubleshooting tips for automatic cnc pipe end forming mach, should check in advance whether the grinding wheel blade defects crack, moisture, power line is reliable.

8, troubleshooting tips for automatic cnc pipe end forming mach The dust removal device should be in good condition before cutting.

9, in the workpiece in the direction of material should not stand people.

troubleshooting tips for automatic cnc pipe end forming mach https://www.john-sheng.com/Automatic-CNC-pipe-end-forming-machine-for-exhaust-pipe.html